FOR THE SERIOUS OFF-ROADER

1

9.5xp EXTREME PERFORMANCE
THE ULTIMATE COMBINATION OF DURABILITY AND PERFORMANCE
For those looking for the ultimate combination of durability and performance for the most extreme conditions, Warn Industries offers the 9.5xp. With 9,500 lbs. of pulling strength, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5xp delivers extreme performance that beats the competition, even in competition. The 9.5xp features a high output parallel Series-Wound motor, a 3-stage planetary geartrain, and a continuous-duty control pack will handle the most difficult pulls. Add to that full-face contact drum seals, and motor and end housing gaskets that deliver extreme-duty water resistance, and you’ve got one tough winch.

9.5XP SPECS/PART NUMBERS
Part Number: PN 68500 9.5xp winch, 12V
Rated Line Pull: 9500 lbs. (4310 kgs.) single-line
Motor: 12V 6 hp, High Output Parallel Series Wound
Remote Control: Remote, 12′ (3.7m) lead, S2 elements, integrated flashlight
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Wire Rope: 100′, 5/16″ diameter (30m, 8mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72″ (1.83m)
Finish: Chromate with high-gloss dark gray powder coat
Drum Diameter/Length: 2.5″/9.0″ (6.4cm/23cm)
Weight: 87 lbs. (39.5 kgs.)

12V DC PERFORMANCE SPECS
Line PullLbs.(Kgs.) Line SpeedFT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.)
0 38(11.6) 70 amps 1/9500(4313)
2000(910) 16.8(5.1) 175 amps 2/8650(4927)
4000(1818) 12.8(3.9) 262 amps 3/7920 (3595)
6000(2720) 10.1(3.1) 335 amps 4/7400(3359)
8000(3630) 8.8(2.7) 425 amps 5/6940(3150)
9500(4310) 7.6(2.3) 480 amps

[divider]

9.5ti THERMOMETRIC SELF-RECOVERY WINCH

TOP-NOTCH STRUCTURE, TOP-NOTCH OPERATOR FEEDBACK, TOP-NOTCH WINCH
The WARN 9.5ti stuffs 9,500 lbs. of pulling power into a compact die-cast aluminum body. What makes this winch so special is its unique operator feedback. A thermometric indicator gives the operator information about motor temperature during the winching process, which translates into more control. For the ultimate in resistance against the elements, the 9.5ti features extreme sealing. Add to this a Gen II Series-Wound motor for an excellent combination of torque and speed, and you’ve got a truly athletic winch.

9.5ti SPECS/PART NUMBERS
Part Number: PN 67550 (12V DC)
Rated Line Pull: 9500 lbs. (4310 kgs.) single-line
Motor: Gen II, Series WoundTM
Remote Control: Remote, 12′ (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5″/9.0″ (6.4cm/23cm)
Weight: 89 lbs. (36.3kgs.)
Wire Rope: 125′, 5/16″ diameter (30m, 8mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72″ (1.83m)
Finish: Chromate with high-gloss powder coat
Nuts/Bolts: PN 39570

12V DC PERFORMANCE SPECS
Line PullLbs.(Kgs.) Line SpeedFT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.)
0 62(18.9) 47 amps 1/9500(4313)
2000(910) 16.3(4.97) 160 amps 2/8650(3927)
4000(1810) 11.8(3.60) 230 amps 3/7920(3595)
6000(2720) 9.31(2.84) 305 amps 4/7400(3359)
8000(3630) 7.59(2.31) 370 amps 5/6940(3150)
9500(4310) 6.67(2.03) 425 amps

9_002

[divider]

9mm

9.5ti THERMOMETRIC MULTI-MOUNT PORTABLE

TOP-NOTCH STRUCTURE, TOP-NOTCH OPERATOR FEEDBACK, TOP-NOTCH WINCH
The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first – operator feedback – the thermometric indicator gives the operator information about motor temperature during the winching operation.

The 9.5ti Multi-Mount includes winch and carrier, wiring for the front of vehicle. Includes remote with integrated flashlight. Front receiver and rear power lead sold separately.

9.5ti MULTI-MOUNT SPECS/PART NUMBERS
Part Number: PN 65735, PN 67912 for the H2 Hummer
Rated Line Pull: 9500 lbs. (4310 kgs) single-line
Motor: Gen II, Series WoundTM
Remote Control for PN 65735: Remote, 12′ (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight
Remote Control for PN 67912: Remote switch, 12′ (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5″/9.0″ (6.4cm/23cm)
Weight: 112 lbs. (51 kgs.)
Wire Rope: 125′, 5/16″ diameter (30m, 8mm diam.)
Fairlead: Hawse
Recommended Battery: 650 CCA minimum for winching
Battery Leads: Front heavy-duty 7.5’/2.2m with quick connect plug
Finish: Chromate with High-gloss Powder Coat

[divider]

12V DC PERFORMANCE SPECS
Line PullLbs.(Kgs.) Line SpeedFT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.)
0 62(18.9) 47 amps 1/9500(4313)
2000(910) 16.3(4.97) 160 amps 2/8650(3927)
4000(1810) 11.8(3.60) 230 amps 3/7920(3595)
6000(2720) 9.31(2.84) 305 amps 4/7400(3359)
8000(3630) 7.59(2.31) 370 amps 5/6940(3150)
9500(4310) 6.67(2.03) 425 amps

[divider]

9.5si M.O.S.F.E.T. CONTROL

SOLID-STATE CONTROL FOR A NEW LEVEL OF RUGGEDNESS
Warn Industries’ M.O.S.F.E.T. (Metal-Oxide Semiconductor Field- Effect Transistor) is sealed from the elements, so it’s great for serious off-roaders. The 9.5si M.O.S.F.E.T. control module eliminates the solenoid pack and its electro-mechanical functions. Operating temperatures from -40?F to +180?F won’t phase it. Voltage drop to the winch is minimal for more efficient operation and low heat gain.

With an extreme sealing system, aluminum die-cast body, and thermometric operator feedback, the 9.5si is the winch for the serious user who needs the best in reliability, durability, and control.

9.5si SPECS/PART NUMBERS
Part Number: PN 67600 (12V DC)
Rated Line Pull: 9500 lbs. (4310 kgs.) single-line
Motor: Gen II, Series WoundTM
Remote Control: 9.5si remote switch 12′ (3.7) lead
Controller Capabilities: M.O.S.F.E.T. technology with diagnostic capabilities
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5″/9.0″ (6.4cm/23cm)
Weight: 89lbs. (36.3kgs.)
Wire Rope: 125′, 5/16″ diameter (30m, 8mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72″ (1.83m)
Finish: Chromate with high-gloss powder coat
Nuts/Bolts: PN 39570
CE Winches: CE products are designed to meet European Standards. CE winches include CE labels and Manuals.

[divider]

12V DC PERFORMANCE SPECS
Line PullLbs.(Kgs.) Line SpeedFT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.)
0 62(18.9) 47 amps 1/9500(4313)
2000(910) 16.3(4.97) 160 amps 2/8650(3927)
4000(1810) 11.8(3.60) 230 amps 3/7920(3595)
6000(2720) 9.31(2.84) 305 amps 4/7400(3359)
8000(3630) 7.59(2.31) 370 amps 5/649(3150)
9500(4310) 6.67(2.03) 425 amps

 

M.O.S.F.E.T. CONTROL PACK

The M.O.S.F.E.T. CONTROL solid-state control pack is designed to give current owners of WARN low profile winches with Series Wound motors the most robust and reliable control pack possible. It replaces the electro-mechanical solenoid and uses no moving parts to control the Power In, Power Out and Stop functions of the winch.

The MOSFET module is sealed to resist any water and contaminate infiltration. It’s also covered by a thick aluminum shell for added durability and heat resistance.

PN 65319 For
12V system. Includes tie-rod mounting bracket, 72″(1.83m) battery power
leads and 6″ (15.2cm) leads from control box to winch. Allows for
mounting of control box to winch.
PN 65320 For
24V system. Includes tie-rod mounting bracket, 72″(1.83m) battery power
leads and 6″ (15.2cm) leads from control box to winch. Allows for
mounting of control box to winch.
PN 65429 For
12V system. Includes mounting bracket, 72″(1.83m) battery power leads
and 72″(1.83m) leads from control box to winch. Allows for mounting of
control box to remote location.
PN 65430 For
24V system. Includes mounting bracket, 72″(1.83m) battery power leads
and 72″(1.83m) leads from control box to winch. Allows for mounting of
control box to remote location.